| 1. |
DIN 11852 (2000.09)
VALVES FOR FOOD AND CHEMICAL INDUSTRIES - STAINLESS STEEL FITTINGS - TEES, BENDS, REDUCERS FOR WELDING-ON ---- NEMŠKI NASLOV: ARMATUREN FUR LEBENSMITTEL UND CHEMIE - FORMSTUCKE AUS NICHTROSTENDEM STAHL - T-STUCKE, BOGEN, REDUZIERSTUCKE ZUM ANSCHW |
| 2. |
DIN 11865 (2003.01)
STAINLESS STEELS FITTINGS FOR ASEPTIC, CHEMICAL AND PHARMACEUTICAL INDUSTRIES - TEES, BENDS, REDUCERS FOR WELDING ON ---- NEMŠKI NASLOV: FORMSTUCKE AUS NICHTROSTENDEM STAHL FUR ASEPTIK, CHEMIE UND PHARMAZIE - T-STUCKE, BOGEN, REDUZIERSTUCKE ZUM A |
| 3. |
DIN 1298 (1978.07)
CONNECTION PARTS FOR HEATING PLANTS; FLUE GAS TUBES, FLUE GAS TUBE KNEES AND FLUE GAS TUBE BENDS FROM METAL SHEET ---- NEMŠKI NASLOV: VERBINDUNGSSTUCKE FUR FEUERUNGSANLAGEN; ROHRE, ROHRKNIE UND ROHRBOGEN AUS METALL, FUR ABGASE |
| 4. |
DIN 19522 (2000.01)
CAST IRON DRAINAGE PIPES AND FITTINGS WITHOUT SOCKETS (SML) ---- NEMŠKI NASLOV: GUSSEISERNE ABFLUSSROHRE UND FORMSTUCKE OHNE MUFFE (SML) (GILT IN VERBINDUNG MIT DIN EN 877) |
| 5. |
DIN 2430-1 (2001.09)
PIPING FOR PIGGING SYSTEMS - PART 1: PIPES AND ELBOWS ---- NEMŠKI NASLOV: ROHRLEITUNGEN FUR MOLCHANLAGEN - TEIL 1: ROHRE UND ROHRBOGEN |
| 6. |
DIN 2605-1 (1991.02)
STEEL BUTT-WELDING PIPE FITTINGS; ELBOWS AND BENDS WITH REDUCED PRESSURE FACTOR ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; ROHRBOGEN; VERMINDERTER AUSNUTZUNGSGRAD |
| 7. |
DIN 2605-2 (1995.06)
BUTT WELDING FITTINGS - ELBOWS - PART 2: FULL CORRELATION OF UTILIZATION ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN - ROHRBOGEN - TEIL 2: VOLLER AUSNUTZUNGSGRAD |
| 8. |
DIN 2607 (2002.05)
TUBE BENDS - FOR BUTT-WELDING OF COPPER ---- NEMŠKI NASLOV: ROHRBOGEN - AUS KUPFER ZUM EINSCHWEISSEN |
| 9. |
DIN 2609 (1991.02)
STEEL BUTT-WELDING PIPE FITTINGS; TECHNICAL DELIVERY CONDITIONS ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; TECHNISCHE LIEFERBEDINGUNGEN |
| 10. |
DIN 2615-1 (1992.05)
STEEL BUTT-WELDING PIPES FITTINGS; TEES WITH REDUCED PRESSURE FACTOR ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; T-STUCKE; VERMINDERTER AUSNUTZUNGSGRAD |
| 11. |
DIN 2615-2 (1992.05)
STEEL BUTT-WELDING PIPE FITTINGS; TEES FOR USE AT FULL SERVICE PRESSURE ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; T-STUCKE; VOLLER AUSNUTZUNGSGRAD |
| 12. |
DIN 2616-1 (1991.02)
STEEL BUTT-WELDING PIPE FITTINGS; ECCENTRIC REDUCERS WITH REDUCED PRESSURE FACTOR ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; REDUZIERSTUCKE; VERMINDERTER AUSNUTZUNGSGRAD |
| 13. |
DIN 2616-2 (1991.02)
STEEL BUTT-WELDING PIPE FITTINGS; REDUCERS FOR USE AT FULL SERVICE PRESSURE ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; REDUZIERSTUCKE; VOLLER AUSNUTZUNGSGRAD |
| 14. |
DIN 2617 (1991.02)
STEEL BUTT-WELDING PIPE FITTINGS; CAPS ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN; KAPPEN; MASSE |
| 15. |
DIN 28650 (1999.11)
DUCTILE IRON FITTINGS - DOUBLE SOCKET 30° BENDS, EN-FITTINGS, MI-FITTINGS, IT-FITTINGS - APPLICATION, DIMENSIONS ---- NEMŠKI NASLOV: FORMSTUCKE AUS DUKTILEM GUSSEISEN - BOGEN 30°, EN-STUCKE, MI-STUCKE, IT-STUCKE - ANWENDUNG, MASSE |
| 16. |
DIN 30670 (1991.04)
POLYETHYLEN COATINGS OF STEEL PIPES AND FITTINGS; REQUIREMENTS AND TESTING ---- NEMŠKI NASLOV: UMHULLUNG VON STAHLROHREN UND -FORMSTUCKEN MIT POLYETHYLEN |
| 17. |
DIN 30673 (1986.12)
BITUMEN COATINGS AND LININGS FOR STEEL PIPES, FITTINGS AND VESSELS ---- NEMŠKI NASLOV: UMHULLUNG UND AUSKLEIDUNG VON STAHLROHREN, -FORMSTUCKEN UND -BEHALTERN MIT BITUMEN |
| 18. |
DIN 86066 (2002.07)
CAST STEEL WELDING ELBOWS FOR STORM VALVES - DN 50 TO 150, CONNECTING DIMENSIONS ACCORDING TO PN 10 ---- NEMŠKI NASLOV: STAHLGUSS-EINSCHWEISSKRUMMER FUR RUCKSCHLAGKLAPPEN - DN 50 BIS DN 150, FLANSCHANSCHLUSS NACH PN 10 |
| 19. |
DIN 86087 (1996.01)
FITTINGS FOR BUTT WELDING INTO COPPER-NICKEL-ALLOY PIPELINES - SADDLE TYPE CONNECTIONS ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN IN ROHRLEITUNGEN AUS KUPFER-NICKEL-LEGIERUNGEN - SATTELSTUTZEN |
| 20. |
DIN 86088 (1996.01)
FITTINGS FOR BUTT WELDING INTO WROUGHT COPPER ALLOY PIPELINES - TEES ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN IN ROHRLEITUNGEN AUS KUPFER-NICKEL-LEGIERUNGEN - T-STUTZEN |
| 21. |
DIN 86089 (1996.01)
FITTINGS FOR BUTT WELDING INTO COPPER-NICKEL-ALLOY PIPELINES - CONCENTRIC REDUCERS ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN IN ROHRLEITUNGEN AUS KUPFER-NICKEL-LEGIERUNGEN - KONISCHE UBERGANGSSTUCKE |
| 22. |
DIN 86090 (1996.01)
FITTINGS FOR BUTT WELDING INTO COPPER-NICKEL-ALLOY PIPELINES - ELBOWS ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN IN ROHRLEITUNGEN AUS KUPFER-NICKEL-LEGIERUNGEN - ROHRBOGEN |
| 23. |
DIN EN 10224 (2003.07)
NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF AQUEOUS LIQUIDS INCLUDING WATER FOR HUMAN CONSUMPTION - TECHNICAL DELIVERY CONDITIONS; GERMAN VERSION EN 10224:2002 NEMŠKI NASLOV: ROHRE UND FITTINGS AUS UNLEGIERTEN STAHLEN FUR DEN TRANSP |
| 24. |
DIN EN 10241 (2000.08)
STEEL THREADED PIPE; GERMAN VERSION EN 10241:2000 ---- NEMŠKI NASLOV: STAHLFITTINGS MIT GEWINDE; DEUTSCHE FASSUNG EN 10241:2000 |
| 25. |
DIN EN 10242 (1995.03)
THREADED PIPE FITTINGS IN MALLEABLE CAST IRON; GERMAN VERSION EN 10242:1994 ---- NEMŠKI NASLOV: GEWINDEFITTINGS AUS TEMPERGUSS; DEUTSCHE FASSUNG EN 10242:1994 |
| 26. |
DIN EN 10242/A1 (1999.06)
THREADED PIPE FITTING IN MALLEABLE CAST IRON; AMENDMENT A1; GERMAN VERSION EN 10242:1994/A1:1999 ---- NEMŠKI NASLOV: GEWINDEFITTINGS AUS TEMPERGUSS; ANDERUNG A1; DEUTSCHE FASSUNG EN 10242:1994/A1:1999 |
| 27. |
DIN EN 10242/A2 (2003.06)
THREADED PIPE FITTING IN MALLEABLE CAST IRON; AMENDMENT A2; GERMAN VERSION EN 10242:1994/A2:2003 NEMŠKI NASLOV: GEWINDEFITTINGS AUS TEMPERGUSS; ANDERUNG A2; DEUTSCHE FASSUNG EN 10242:1994/A2:2003 |
| 28. |
DIN EN 10253-1 (1999.11)
BUTT-WELDING PIPE FITTINGS - PART 1: WROUGHT CARBON STEEL FOR GENERAL USE AND WITHOUT SPECIFIC INSPECTION REQUIREMENTS; GERMAN VERSION EN 10253-1:1999 ---- NEMŠKI NASLOV: FORMSTUCKE ZUM EINSCHWEISSEN - TEIL 1: UNLEGIERTER STAHL FUR ALLGEMEINE ANW |
| 29. |
DIN EN 10284 (2000.08)
MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR POLYETHYLENE (PE) PIPING SYSTEMS; GERMAN VERSION EN 10284:2000 ---- NEMŠKI NASLOV: TEMPERGUSSFITTINGS MIT KLEMMANSCHLUSSEN FUR POLYETHYLEN-(PE-)ROHRLEITUNGSSYSTEME; DEUTSCHE FASSUNG EN 10284: |
| 30. |
DIN EN 10288 (2003.12)
STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL TWO LAYER EXTRUDED POLYETHYLENE BASED COATINGS; GERMAN VERSION EN 10288:2002 NEMŠKI NASLOV: STAHLROHRE UND -FORMSTUCKE FUR ERD- UND WASSERVERLEGTE ROHRLEITUNGEN - IM ZWEISCHICHTV |
| 31. |
DIN EN 1123-1 (1999.03)
PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL; GERMAN VERSION EN 1123-1:1999 ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS |
| 32. |
DIN EN 1123-2 (1999.03)
PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS; GERMAN VERSION EN 1123-2:1999 ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS LANGSNAHTGESCHWEISSTEM, FEUE |
| 33. |
DIN EN 1124-1 (1999.04)
PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL; GERMAN VERSION EN 1124-1:1999 ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS LANGSNAHT |
| 34. |
DIN EN 1124-2 (1999.04)
PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES, WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: SYSTEME S; DIMENSIONS; GERMAN VERSION EN 1124-2:1999 ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS LANGSNAHTGESCHWEISSTEM, N |
| 35. |
DIN EN 1124-3 (1999.04)
PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X; DIMENSIONS; GERMAN VERSION EN 1124-3:1999 ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS LANGSNAHTGESCHWEISSTEM, NIC |
| 36. |
DIN EN 1254-1 (1998.03)
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES; GERMAN VERSION EN 1254-1:1998 ---- NEMŠKI NASLOV: KUPFER UND KUPFERLEGIERUNGEN - FITTINGS - TEIL 1: KAPILLARLOT |
| 37. |
DIN EN 1254-2 (1998.03)
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES; GERMAN VERSION EN 1254-2:1998 ---- NEMŠKI NASLOV: KUPFER UND KUPFERLEGIERUNGEN - FITTINGS - TEIL 2: KLEMMVERBINDUNGEN FUR KUPFERROHRE; |
| 38. |
DIN EN 1254-3 (1998.03)
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES; GERMAN VERSION EN 1254-3:1998 ---- NEMŠKI NASLOV: KUPFER UND KUPFERLEGIERUNGEN - FITTINGS - TEIL 3: KLEMMVERBINDUNGEN FUR KUNSTSTOFF |
| 39. |
DIN EN 1254-4 (1998.03)
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS; GERMAN VERSION EN 1254-4:1998 ---- NEMŠKI NASLOV: KUPFER UND KUPFERLEGIERUNGEN - FITTINGS - TEIL 4: FITTINGS ZUM VE |
| 40. |
DIN EN 1254-4 BERICHTIGUNG 1 (2000.01)
CORRIGENDA TO DIN EN 1254-4:1998-03 (EN 1254-4:1998/AC:1999) ---- NEMŠKI NASLOV: BERICHTIGUNGEN ZU DIN EN 1254-4:1998-03 (EN 1254-4:1998/AC:1999) |
| 41. |
DIN EN 1254-5 (1998.03)
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES; GERMAN VERSION EN 1254-5:1998 ---- NEMŠKI NASLOV: KUPFER UND KUPFERLEGIERUNGEN - FITTINGS - TEIL 5: FITTINGS MIT GERINGER EINST |
| 42. |
DIN EN 12842 (2000.08)
DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS; GERMAN VERSION EN 12842:2000 ---- NEMŠKI NASLOV: DUKTILE GUSSFORMSTUCKE FUR PVC-U- ODER PE-ROHRLEITUNGSSYSTEME - ANFORDERUNGEN UND PRUFVERFAHREN; DEUTSCHE FASSU |
| 43. |
DIN EN 448 (2003.05)
PREINSULATED BONDED PIPE SYSTEMS FOR UNDERGROUND HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE; GERMAN VERSION EN 448:1994 ---- NEMŠKI NASLOV: WERKMASSIG GEDAMMTE V |
| 44. |
DIN EN 545 (2002.09)
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS; GERMAN VERSION EN 545:2002 ---- NEMŠKI NASLOV: ROHRE, FORMSTUCKE, ZUBEHORTEILE AUS DUKTILEM GUSSEISEN UND IHRE VERBINDUNGEN FUR WASSER |
| 45. |
DIN EN 598 (1994.11)
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATION - REQUIREMENTS AND TEST METHODS; GERMAN VERSION EN 598:1994 ---- NEMŠKI NASLOV: ROHRE, FORMSTUCKE, ZUBEHORTEILE AUS DUKTILEM GUSSEISEN UND IHRE VERBINDUNGEN FUR D |
| 46. |
DIN EN 877 (2000.01)
CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE; GERMAN VERSION EN 877:1999 ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS GUSSEISEN, DEREN VERB |
| 47. |
DIN EN 969 (1995.11)
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS; GERMAN VERSION EN 969:1995 ---- NEMŠKI NASLOV: ROHRE, FORMSTUCKE, ZUBEHORTEILE AUS DUKTILEM GUSSEISEN UND IHRE VERBINDUNGEN FUR GASLEITU |
| 48. |
DIN EN 969/A1 (1999.04)
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS; GERMAN VERSION EN 969:1995/A1:1998 ---- NEMŠKI NASLOV: ROHRE, FORMSTUCKE, ZUBEHORTEILE AUS DUKTILEM GUSSEISEN UND IHRE VERBINDUNGEN FUR |
| 49. |
DVGW GW 340 (1999.04)
FIBER CONCRETE COATING FOR THE MECHANICAL PROTECTION OF STEEL PIPES AND FITTINGS WITH POLYOLEFINE COATING - REQUIREMENTS AND TESTING, RECOATING AND REPAIR, INSTRUCTIONS FOR INSTALLATION AND CORROSION PROTECTION ---- NEMŠKI NASLOV: FZM-UMMANTELUNG |
| 50. |
DVGW GW 6 (1996.01)
CAPILLARY SOLDERED FITTINGS MADE OF RED BRASS AND REDUCER FITTINGS MADE OF COPPER AND RED BRASS - SPECIFICATIONS AND TEST REQUIREMENTS ---- NEMŠKI NASLOV: KAPILLARLOTFITTINGS AUS ROTGUSS UND UBERGANGSFITTINGS AUS KUPFER UND ROTGUSS - ANFORDERUNGE |
| 51. |
DVGW GW 8 (1996.01)
CAPILLARY SOLDERED FITTINGS MADE OF COPPER PIPES - SPECIFICATIONS AND TEST REQUIREMENTS ---- NEMŠKI NASLOV: KAPILLARLOTFITTINGS AUS KUPFERROHREN - ANFORDERUNGEN UND PRUFBESTIMMUNGEN |
| 52. |
DVGW VP 545 (2000.11)
DUCTILE IRON PIPES AND FITTINGS FOR GASEOUS FUELS AND WATER SUPPLY - REQUIREMENTS AND TESTS ---- NEMŠKI NASLOV: ROHRE UND FORMSTUCKE AUS DUKTILEM GUSSEISEN FUR DIE GAS- UND WASSERVERSORGUNG - ANFORDERUNGEN UND PRUFUNGEN |
| 53. |
DVGW VP 600 (2001.07)
METALLIC FITTINGS FOR JOINTING MATERIALS FOR POLYETHYLENE PIPES (PE 80, PE 100) AND CROSSLINKED POLYETHYLENE (PE-X(INDEX)A) PIPES IN THE GAS AND DRINKING WATER FIELD - REQUIREMENTS AND TESTS ---- NEMŠKI NASLOV: WERKSTOFFUBERGANGSVERBINDER AUS META |
| 54. |
DVGW W 346 (2000.08)
CAST IRON AND STEEL PIPES AND COMPONENTS WITH INTERNAL MORTAR LINING - HANDLING ---- NEMŠKI NASLOV: GUSS- UND STAHLROHRLEITUNGSTEILE MIT ZM-AUSKLEIDUNG - HANDHABUNG |
| 55. |
SIST EN 60534-6-2 ang (2002.06)
INDUSTRIAL PROCESS CONTROL VALVES - PART 6-2: MOUNTING DETAILS FOR ATTACHMENT OF POSITIONERS TO CONTRO VALVES - POSITIONER MOUNTING ON ROTARY ACTUATORS (IEC 60534-6-2:2000) |
| 56. |
SIST EN 10241 ang (2001.11)
JEKLENI FITINGI Z NAVOJEM |
| 57. |
SIST EN 10242 ang (1997.05)
FITINGI Z NAVOJEM IZ TEMPRANE LITINE |
| 58. |
SIST EN 10242/A1 ang (2000.04)
FITINGI Z NAVOJEM IZ TEMPRANE LITINE |
| 59. |
SIST EN 10242/AC ang (2000.11)
FITINGI Z NAVOJEM IZ TEMPRANE LITINE |
| 60. |
SIST EN 10253-1 ang (2000.11)
CEVNI FITINGI ZA SOLEŽNE ZVARE - 1. DEL: OGLIKOVA JEKLA ZA SPLOŠNO UPORABO IN BREZ POSEBNIH ZAHTEV KONTROLE |
| 61. |
SIST EN 10284 ang (2001.11)
FITINGI IZ TEMPRANE LITINE S KONIČNIMI PRIKLJUČKI ZA POLIETILENSKE (PE) CEVOVODE |
| 62. |
SIST EN 1123-1 ang (2000.11)
VZDOLŽNO VARJENE JEKLENE CEVI IN SPOJNIKI, VROČE GALVANIZIRANI, Z OBOJKO, ZA SISTEME ZA ODPADNO VODO - 1. DEL: ZAHTEVE, PRESKUŠANJE IN KONTROLA KAKOVOSTI |
| 63. |
SIST EN 1123-2 ang (2000.11)
VZDOLŽNO VARJENE JEKLENE CEVI IN SPOJNIKI, VROČE GALVANIZIRANI, Z OBOJKO, ZA SISTEME ZA ODPADNO VODO - 2. DEL: MERE |
| 64. |
SIST EN 1124-1 ang (2000.11)
VZDOLŽNO VARJENE NERJAVNEJEKLENE CEVI IN SPOJNIKI Z OBOJKO ZA SISTEME ZA ODPADNO VODO - 1. DEL: ZAHTEVE, PRESKUŠANJE IN KONTROLA KAKOVOSTI |
| 65. |
SIST EN 1124-2 ang (2000.11)
VZDOLŽNO VARJENE NERJAVNEJEKLENE CEVI IN SPOJNIKI Z OBOJKO ZA SISTEME ZA ODPADNO VODO - 2. DEL: MERE |
| 66. |
SIST EN 1124-3 ang (2000.11)
VZDOLŽNO VARJENE NERJAVNEJEKLENE CEVI IN SPOJNIKI Z OBOJKO ZA SISTEME ZA ODPADNO VODO - 3. DEL: SISTEM X - MERE |
| 67. |
SIST EN 1254-1 ang (1999-11)
BAKER IN BAKROVE ZLITINE - FITINGI - 1.DEL: FITINGI S KONCI ZA KAPILARNO MEHKO IN TRDO LOTANJE NA BAKRENE CEVI |
| 68. |
SIST EN 1254-2 ang (1999-11)
BAKER IN BAKROVE ZLITINE - FITINGI - 2. DEL: FITINGI Z NAKRČENIMA PRIKLJUČKOMA ZA SPAJANJE Z BAKRENIMI CEVMI |
| 69. |
SIST EN 1254-3 ang (2000.11)
BAKER IN BAKROVE ZLITINE - FITINGI - 3. DEL: FITINGI Z NAKRČENIMA PRIKLJUČKOMA ZA SPAJANJE S PLASTIČNIMI CEVMI |
| 70. |
SIST EN 1254-4 ang (2000.11)
BAKER IN BAKROVE ZLITINE - FITINGI - 4. DEL: FITINGI, PRI KATERIH VSAJ EN KONEC NIMA NAKRČENEGA PRIKLJUČKA ALI JE PRIREJEN ZA KAPILARNO SPAJKANJE |
| 71. |
SIST EN 1254-4:2000/AC ang (2002.02)
BAKER IN BAKROVE ZLITINE - 4. DEL: FITINGI, KI SO NA ENEM KONCU PRIREJENI ZA KAPILARNO LOTANJE ALI NAKRČNO ZVEZO, NA DRUGEM KONCU PA ZA DRUGAČNO ZVEZO |
| 72. |
SIST EN 1254-5 ang (2000.11)
BAKER IN BAKROVE ZLITINE - FITINGI - 5. DEL: FITINGI, KI IMAJO KRAJŠI KONEC PRIREJEN ZA KAPILARNO TRDO SPAJKANJE NA BAKRENE CEVI |
| 73. |
SIST EN 545 ang (2002.11)
CEVI IZ SIVE LITINE S KROGLASTIM GRAFITOM, PRIROBNICE, PRIPOMOČKI IN SPOJI NA CEVOVODIH ZA VODO - ZAHTEVE IN METODE PRESKUŠANJA |
| 74. |
SIST EN 598 ang (1998-10)
CEVI, FITINGI IN DODATKI IZ DUKTILNE LITINE ZA KANALIZACIJO - ZAHTEVE IN POSTOPKI PRESKUŠANJA |
| 75. |
SIST EN 640 ang (1996-03)
ARMIRANOBETONSKE TLAČNE CEVI IN BETONSKE TLAČNE CEVI S PORAZDELJENO ARMATURO (BREZ KOVINSKEGA PLAŠČA), SKUPAJ S STIKI IN FAZONSKIMI DELI |
| 76. |
SIST EN 877 ang (2001.01)
CEVI, FITINGI IN DODATKI IZ DUKTILNE LITINE ZA HIŠNE VODOVODNE ODTOKE - ZAHTEVE, POSTOPKI PRESKUŠANJA IN ZAGOTAVLJANJE KAKOVOSTI |
| 77. |
SIST EN 969/A1 ang (1999-09)
CEVI, FITINGI IN DODATKI IZ DUKTILNE LITINE ZA PLINOVODE - ZAHTEVE IN POSTOPKI PRESKUŠANJA - DOPOLNILO A1 |
| 78. |
SIST ISO 3477 ang (1995-11)
POLIPROPILENSKE (PP) CEVI IN FITINGI - GOSTOTA - DOLOČANJE IN SPECIFIKACIJA |
| 79. |
SIST ISO 3545-3 ang (1995-11)
JEKLENE CEVI IN FITINGI - SIMBOLI ZA RABO V SPECIFIKACIJAH - 3. DEL: CEVNI FITINGI S KROŽNIM PREREZOM |
| 80. |
SIST ISO 49 ang (2001.09)
FITINGI IZ TEMPRANE LITINE Z NAVOJI PO ISO 7-1 |
| 81. |
SIST ISO 49/TC ang (2001.09)
FITINGI IZ TEMPRANE LITINE Z NAVOJI PO ISO 7-1 - TEHNIČNI POPRAVEK 1 |
| 82. |
SIST ISO 6455 ang (1995-11)
FITINGI IZ NEMEHČANEGA POLIVINILKLORIDA (PVC - U) OGLAVKI ZA SPOJE Z ELASTIČNIMI TESNILNIMI OBROČI ZA CEVI POD TLAKOM - MONTAŽNE DIMENZIJE - METRSKA SERIJA |
